Master the core: the working principle and importance of brake pads

Behind every braking action, it is the brake pads that silently assume the task of slowing down and even stopping. When we step on the brake pedal, the hydraulic system pushes the calipers to clamp the brake disc. At this time, the brake pads generate resistance through friction to slow the vehicle until it comes to a complete stop. Good brake pads are not only related to driving efficiency, but also the basis for the safety of passengers' lives and property.

In reality, there are many tragic incidents of traffic accidents caused by inferior or aging brake pads. For example, there was a major car accident in a city where a car rear-ended a bus. After the investigation, it was found that the left brake pad of the front wheel of the vehicle involved had been worn out and could not function normally. Similar cases are common, which reminds us that we must attach great importance to the health of the braking system.

Brake pads play a vital role in the braking process

Quality Identification: Select the most suitable for your high-performance brake pads

There are many types of brake pads on the market, and the common types include ceramic substrates and metal composites. The former has lower noise, less dust and better heat dissipation performance; the latter is known for its higher strength and durability. However, both have their own advantages and disadvantages, not the more expensive the better, the key is whether to match your specific car environment and personal preferences.

It is undoubtedly wise to choose brake pads of a well-known brand. Famous brands often undergo rigorous testing and pass international quality certifications, such as TS16949 and other industry standards. In addition, please be sure to carefully check the product specification and technical parameter table, confirm the model specifications and car match before purchasing. This is the only way to ensure the selection of brake pads that are economical, efficient and reliable.

Data Talk: Understanding the Meaning of Key Performance Indicators

There are many standards to measure the quality of a brake pad, the three most important of which are wear resistance, high temperature recession resistance and noise control level. Strong wear resistance means a longer service life and reduces the cost of frequent replacement; strong resistance to high temperature degradation indicates that there will be no obvious attenuation even if used for a long time with high intensity; and the low-noise design is to provide a quiet and comfortable Driving experience.

For the average consumer, there are some simple ways to initially assess the performance of these indicators. For example, touch the surface of the old and new brake pads by hand to compare. If it feels rough, it means that there is a certain degree of wear and tear; pay attention to whether there is abnormal noise when driving is also one of the good self-examination methods. Of course, the most authoritative data also need to rely on professional instruments to measure.

Preparing for a rainy day: the importance of regular inspection and timely replacement

It is very important to develop the habit of regular maintenance. It is recommended to go to a regular repair shop for a comprehensive inspection at regular intervals (usually about 5,000 kilometers). The technicians will check the physical properties of the brake pads one by one, especially the thickness changes. If an area is found to be significantly thinner than other parts or there is crack damage, it is necessary to immediately take appropriate measures to repair or even directly replace the new parts.

Don't take chances and ignore the early warning signals. Once the fault breaks out completely, it will often cost more to deal with it. Therefore, it is better to prevent in advance than to mend after a sheep has been lost. Let us always be vigilant and guard the safety bottom line of every trip.

Care for your car: Tips for proper installation and use

In addition to careful purchase, the right way to use is also indispensable. Smooth starting and stopping can effectively reduce unnecessary impact and avoid excessive wear caused by sudden acceleration or emergency braking. In addition, remember to maintain the appropriate tire pressure value, because the appropriate air pressure helps to reduce the tire rolling resistance, indirectly reducing the demand for braking force.

At the same time, it is also necessary to understand the basic operation process. Careful implementation of various tasks in accordance with the manual guidelines, such as timely disassembly, cleaning and lubrication of all movable joints, etc., will help extend the overall life of the brake pads and keep them in optimal operating condition.

Green travel: the new trend of environmentally friendly brake pads

In recent years, "green water and green mountains" has become the consensus of the whole society, and the automobile industry is no exception to move towards energy conservation and environmental protection. Many manufacturers have invested resources in the development of new brake pad materials, and strive to achieve the goal of lower pollution emissions and higher biodegradation rate. Such innovative products not only have excellent traditional mechanical properties, but also show high ecological protection value in production and waste.

With so many options, we should prioritize brand options that have good ecological benefits. While enjoying the convenience of life brought about by scientific and technological progress, we also do not forget to fulfill the sense of social responsibility that citizens should have, and jointly create a better future world.